Vital-Fleisch - Lean replacement part logistics

Sensor

Company

Vital Fleisch GmbH


Industrial sector

Meat wholesaler


Location

Speyer, Germany

Robust hygiene in the meat industry

The food industry has especially high requirements for hygiene and thus for sensor systems as well, especially in meat processing plants. Plants must be cleaned according to the HACCP hygiene regulations, in some cases with aggressive media. The electronic components cannot be disassembled every time for this. Therefore they must be constructed with a robust sealing principle and food-safe materials. autosen offers protection classes IP65/IP67/IP68/IP69K for optical sensors with stainless steel housing as standard products for wet areas and the food industry. For Vital-Fleisch that means savings of up to 25 % with unrestricted durability and significantly leaner spare parts logistics.

The sensor system plays a significant role in automating production and storage processes. Altogether about 600 sensors are installed in the entire plant at Vital-Fleisch, most of them light barriers. As a QS and IFS-certified company, Vital-Fleisch places great importance on freshness and hygiene. That means demanding cleaning routines are carried out frequently and intensively, involving steam jets as well as cleaning and disinfecting agents containing caustic solutions, chlorine and oxidants. Protection classes IP65/IP67/IP68/IP69K ensure that the sensors can withstand these harsh conditions long-term.

Cutting costs for spare parts

And yet: You can't make an omelette without breaking eggs. The permanent chemical and mechanical stresses mean that components fail from time to time. Spare parts for the original equipment are often reordered automatically, which drives up costs, requires proper spare parts management and ties up capital. Ultimately enough components must be kept in reserve to prevent the process chain from breaking down. As part of a test series, Vital-Fleisch examined an economical and logistically simpler alternative from autosen.

At first eight optical sensors from autosen were mounted on the conveyor belts and in empties storage. They are used there for the start/stop function and to report full or empty, for example the AO001 retro-reflective sensor, designed for wet areas and the food industry. This compact sensor with stainless steel housing has a colour-independent scanning range which is continuously variable via potentiometer. The light scanner offers interference-resistant background suppression, even with highly reflective backgrounds like stainless steel.

The potentiometer is equipped with a double seal and is also flush recessed, like the front panel. That allows for cleaning with no residue. The coated front panel is made of resistant, shatterproof plastic. The standardised M8 plug connection allows for connection to existing wiring without any effort, to ensure a continuous sealing concept. Handling is just as simple. Tests conducted since then have also shown convincing results in functionality and cost-effectiveness: The operating manager calculated savings of up to 25% in comparison to the previous components.

"We have had no problems of any kind using autosen spare parts and have been able to incorporate the devices one to one into the existing connections."

Karl-Heinz Toews

Operating manager and authorised representative

Ihr Partner für Automatisierungstechnik & IIoT
Ihr Partner für Automatisierungstechnik & IIoT

Products used

400+ in stock!
Online -5,5 %
AI055Inductive sensor Standard Class IP67
Go to customer reviews(65)
  • Metal housing M12 thread
  • M12 connector (3-pin)
  • Non-flush
  • sensing range 8 mm
  • Normally open (NO)
10.56
9.98
50+ in stock!
Online -5,5 %
AO005Diffuse reflection sensor with PA housing
Go to customer reviews(50)
  • Sensing range 0.05...1.4 m
  • Red light
  • with background suppression
  • Light-on mode/ normally open
79.96
75.56