Overview
- Retro-reflective sensor with metal housing (brass, white bronze plated), M18 thread and M12 connector (3-pin)
- Sensing range 0.03...4 m
- dark-on mode/ normally open
- The polarisation filter in combination with a prismatic reflector minimises the probability of false switching due to highly reflective objects; therefore ideally suited for the detection of highly reflective objects
- Protection rating IP67
Description
Retro-reflective sensor from autosen with polarisation filter, M18x1 metal thread, dark-on mode The photoelectric sensor AO014 is a retro-reflective sensor used in combination with a reflector (autosen prismatic reflector AA950/AA951). The decisive advantage of a retro-reflective sensor with polarisation filter in combination with a prismatic reflector is that the probability of incorrect switching by highly reflective objects (e.g. reflective vests etc.) is minimised. The prismatic reflector focusses the light, turns it by 90° and then reflects it. The polarisation filter avoids that light beams other than those emitted by the sensor itself cause switching of the sensor. Even highly reflective metal objects can be detected since their reflection cannot pass the polarisation filter.Tried-and-tested millions of times in daily use. Photoelectric sensors from autosen are manufactured in Germany according to highest quality demands with regard to robustness, noise immunity and reliability. Save up to 50 % compared to other manufacturers, benefit from the 30-day right to return and 5-year warranty for our products.
For further technical details as well as suitable accessories (sensor cables AA005, AA006, AA007, AA008; angle bracket AA903 and prismatic reflector AA950/AA951) please see the detailed data sheet – at autosen.com.
Technical data AO014
General information
Retro-reflective sensor
1000 Hz
Red light
0,03 ... 4 m
With regard to prismatic reflector Ø 80
1000 Hz
Red light
0,03 ... 4 m
With regard to prismatic reflector Ø 80
Outputs / inputs
Dark switching
No
No
Electrical data
10 ... 36 V DC supply class 2 cULus
Direct voltage (DC)
PNP
200 mA
2.5 V
15 mA
II
Yes
Yes
Yes
Direct voltage (DC)
PNP
200 mA
2.5 V
15 mA
II
Yes
Yes
Yes
Mechanical data
Cylindrical with thread
M18x1
60 mm
V4A (1.4404)
PMMA
M12
3-pin
Contacts gold-plated
M18x1
60 mm
V4A (1.4404)
PMMA
M12
3-pin
Contacts gold-plated
Ambient conditions
-25 °C
60 °C
IP67
60 °C
IP67
Additional information
509 years
Switching status: LED, yellow
2 fastening nuts
DIN EN 60947-5-2
CE
cULus
Switching status: LED, yellow
2 fastening nuts
DIN EN 60947-5-2
CE
cULus
Drawings
x - distance [mm]
y - excess gain factor
Downloads
Data sheet Customer reviews