Receiver
< 3 m*
Red light 
Overview
- Through beam sensor in miniature design; thanks to the compact size and pigtail, ideal for confined installation environments
- Sensing range <3 m
- Easy adjustment due to visible red light
- Insensitive to dust, steam and lens contamination
- Protection rating IP65/ IP67/ IP68/ IP69k
Industry 4.0 & IIoT
Discover a universe of new possibilities with smart solutions from autosen
Discover nowDescription
AO023 is used as a dark-on receiver for photoelectric through beam sensors. The matching transmitter is AO022 from autosen. The photoelectric system works with red light and boasts a very large range of roughly three metres. The distance and all other parameters can be set conveniently using autosen:io software and IO-Link.With through beam sensors, the light beam only travels in one direction. This has the advantage that the photoelectric system is less sensitive to dust, steam and other disturbances. The high protection rating of IP67 ensures the reliable detection of very small, flat and reflective objects even in harsh conditions. The compact structural shape enables installation in confined spaces. It is conveniently connected via an M8 plug, which is connected to the light barrier receiver with a 30cm long 3 x 0.08mm² PVC cable.
Installation accessories, connection technology and the matching through beam sensor transmitter AO022 can be found below on the website.
If you have questions regarding the IO-Link parameterization or want to use the parameterization service of autosen, please do not hesitate to contact us. Or start directly with the IO-Link starter kit ADS01.
Technical data AO023
General information
*In combination with the transmitter AO022
Receiver
Red light
< 3 m*
Receiver
Red light
< 3 m*
Outputs / inputs
Dark switching
Light/dark switching programmable via io-link
Yes
Light/dark switching programmable via io-link
Yes
Electrical data
10 ... 30 V DC supply class 2 cULus
Direct voltage (DC)
PNP
100 mA
2.5 V
15 mA
III
Yes
Yes
Direct voltage (DC)
PNP
100 mA
2.5 V
15 mA
III
Yes
Yes
Mechanical data
Cuboid
V4A (1.4401)
ABS
PMMA
M8
With pigtail
4-pin
Contacts gold-plated
V4A (1.4401)
ABS
PMMA
M8
With pigtail
4-pin
Contacts gold-plated
Ambient conditions
-25 °C
60 °C
IP65
IP67
60 °C
IP65
IP67
Additional information
Switching status: LED, yellow
Operation: LED, green
No accessories included
DIN EN 60947-5-2
CE
Operation: LED, green
No accessories included
DIN EN 60947-5-2
CE
Drawings
x - distance [mm]
y - excess gain factor
Downloads
Data sheet
Customer reviews
Cloud compatible
