M12
10 ... 1000 Hz
Analogue output
Overview
- Vibration sensor according to ISO 10816 with M12 connector and LED display
- Vibration measuring range 0...25 mm/s (RMS)
- Frequency range 10...1000 Hz
- Protection rating IP67/ IP68/ IP69k
- Analogue output
Description
The AV001 is a vibration transmitter to ISO 10816 with device connection via an M12-connector. The unit has an analogue output, a measuring range from: veff (RMS): 0 ... 25 mm/s and the tried-and-tested 2-wire connection technology.Vibration monitoring of machines and equipment to ISO 10816.
Electronic vibration monitors from autosen monitor the overall vibration condition of machines and plants according to ISO 10816. The sensors measure the effective vibration velocity at a non-rotating component surface - as usual at an optimum price/performance ratio.
Tried-and-tested millions of times in daily use. Vibration transmitters from autosen are manufactured according to the highest quality standards with regard to robustness, noise immunity and reliability. We offer you a 5-year warranty for our product – with money-back guarantee!
Note: When used with an analogue output use exclusively sensor cables without LED.
Technical data AV001
General information
10...1000 Hz
0...25 mm/s (RMS)
1
0...25 mm/s (RMS)
1
Outputs / inputs
4 ... 20 mA
When used with an analog output use exclusively sensor cables without LED
When used with an analog output use exclusively sensor cables without LED
Electrical data
9.6 ... 32 V DC
Direct voltage (DC)
PNP
III
Yes
Direct voltage (DC)
PNP
III
Yes
Mechanical data
Threaded pin
V4A (1.4404)
IP67
IP68
IP69k
M12
Contacts gold-plated
V4A (1.4404)
IP67
IP68
IP69k
M12
Contacts gold-plated
Accuracy
< 0.5% of final value
0.25 %
< ± 3 % of final value
0.25 %
< ± 3 % of final value
Ambient conditions
-30 °C
135 °C
UL application: < 80 °C
135 °C
UL application: < 80 °C
Additional information
881 years
2 threaded pins
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-5 surge
DIN EN 61000-4-6 HF grid-bound
CE
cULus
2 threaded pins
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-5 surge
DIN EN 61000-4-6 HF grid-bound
CE
cULus
Drawings
Tightening torque 8 Nm
1: Threaded adapter 1/4"-28 UNF / M8 x 1.25 mm
2: Threaded adapter 1/4"-28 UNF / Tightening torque 8 Nm
Downloads
Data sheet Customer reviews
Cloud compatible
