Overview
- Vibration sensor according to ISO 10816 with M12 connector and LED display
- Vibration measuring range 0...25 mm/s (RMS)
- Frequency range 10...1000 Hz
- Protection rating IP67
- Analogue output, 1x normally closed
Your advantages at autosen.com
- 30-day right of return
- 5-year warranty
- Super-fast delivery
- Over 20,000 satisfied customers
Description
The AV002 is a vibration monitor to ISO 10816 with device connection via an M12-connector. The unit has two outputs and a measuring range of veff (RMS): 0 ... 25 mm/s. The unit can be easily set via the setting rings.Vibration monitoring of machines and equipment to ISO 10816.
Electronic vibration monitors from autosen monitor the overall vibration condition of machines and plants according to ISO 10816. The sensors measure the effective vibration velocity at a non-rotating component surface - as usual at an optimum price/performance ratio.
Tried-and-tested millions of times in daily use. Vibration monitors from autosen are manufactured according to the highest quality standards with regard to robustness, noise immunity and reliability. We offer you a 5-year warranty for our product – with money-back guarantee!
Note: When used with an analogue output use exclusively sensor cables without LED.
Technical data AV002
General information
10...1000 Hz
0...25 mm/s (RMS)
1
1 ... 60 s
0...25 mm/s (RMS)
1
1 ... 60 s
Outputs / inputs
Normally closed (NC)
4 ... 20 mA
When used with an analog output use exclusively sensor cables without LED
4 ... 20 mA
When used with an analog output use exclusively sensor cables without LED
Electrical data
18 ... 32 V DC
Direct voltage (DC)
PNP
500 mA
2 V
50 mA
III
Yes
Yes
Yes
Direct voltage (DC)
PNP
500 mA
2 V
50 mA
III
Yes
Yes
Yes
Mechanical data
Threaded pin
73.1 mm
PBT
V4A (1.4404)
PC
Viton
IP67
M12
4-pin
Contacts gold-plated
73.1 mm
PBT
V4A (1.4404)
PC
Viton
IP67
M12
4-pin
Contacts gold-plated
Accuracy
< 0.5% of final value
< ±4 % of end value
0.25 %
< ± 3 % of final value
< ±4 % of end value
0.25 %
< ± 3 % of final value
Ambient conditions
-30 °C
125 °C
UL application: < 80 °C
125 °C
UL application: < 80 °C
Additional information
510 years
LED
Yellow
Green
No accessories included
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
Switching point compensation
Switching delay
CE
cULus
LED
Yellow
Green
No accessories included
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
Switching point compensation
Switching delay
CE
cULus
Drawings
1: tightening torque 15 Nm M8 standard thread
1.25 mm pitch
Downloads
Data sheet Customer reviews