AR006Speed sensor with IO-Link
NET PRICE (plus VAT)
108.00 €
Offline: 114.29 €
GROSS PRICE (incl. VAT)
128.52 €
Offline: 136.00 €
Incl. 5.50 % online discount
26 in stock!
Overview
- Evaluation of rotary and linear movements for underspeed and blocking
- 1x normally open/ normally closed and 1x pulse output
- Sensing range 12 mm
- Stainless steel housing with M18 thread and M12 connector (4-pin), LED switch indicator and IO-Link locking function that prevents unauthorised adjustment of the sensor during operation
- Sensing ring for adjusting the switch point and for start-up suppression
Description
Use the AR006 speed sensor to evaluate your speed. Underspeed and overspeed of rotating or linear movements are reliably detected. Speed monitoring is based on the inductive measuring principle. All metals can therefore be detected without physical contact and wear-free.The AR006 speed monitor has a sensing range of 12 mm and can optionally be operated in normally open or normally closed function. The setting range can conveniently be configured from 3 to 24,000 pulses per minute with a setting ring. The AR006 has two outputs so that the simple pulse train can be generated in parallel to the set switching point.
Adjustable start-up suppression prevents incorrect switching when starting the machine being checked. Clearly visible LEDs indicate the operating and switching status of the speed monitor. A locking function prevents unauthorised adjustment of the sensor operation.
The IO-Link interface facilitates convenient parameter setting for the sensor and provides additional information about the monitored speed: current speed, minimum/maximum speed and configurable switching points.
Technical data AR006
General information
Evaluation of rotary and linear movements for falling below nominal value; blocking
Yes
Inductive sensor
3...24000 Imp/Min
12 mm
Yes
Inductive sensor
3...24000 Imp/Min
12 mm
Outputs / inputs
Yes
Normally open / Normally closed programmable
Yes
Normally open / Normally closed programmable
Yes
Electrical data
10 ... 30 V DC
Direct voltage (DC)
PNP
NPN*
*IO-Link parameterisation
250 mA
2.5 V
15 mA
II
Yes
Yes
Yes
Direct voltage (DC)
PNP
NPN*
*IO-Link parameterisation
250 mA
2.5 V
15 mA
II
Yes
Yes
Yes
Mechanical data
Cylindrical with thread
M18x1
Not flush
PEI
V4A (1.4404)
PBT
M12
4-pin
Contacts gold-plated
M18x1
Not flush
PEI
V4A (1.4404)
PBT
M12
4-pin
Contacts gold-plated
Accuracy
V2A approx. 0.7
Ms approx. 0.5
Al approx. 0.5
Cu approx. 0.4
10 % of the real switching distance Sr
Ms approx. 0.5
Al approx. 0.5
Cu approx. 0.4
10 % of the real switching distance Sr
Ambient conditions
-25 °C
85 °C
IP65
IP66
IP67
IP68
IP69k
85 °C
IP65
IP66
IP67
IP68
IP69k
Additional information
466 years
2 fastening nuts
DIN EN 55011: Class B
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
DIN EN 60068-2-27 Ea
DIN EN 60068-2-27
EN 60068-2-52 kb; Schärfgrad 5(4 Prüfzyklen)
EN 60068-2-14 Na
DIN EN 60068-2-6 Fc
CE
cULus
UKCA
2 fastening nuts
DIN EN 55011: Class B
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
DIN EN 60068-2-27 Ea
DIN EN 60068-2-27
EN 60068-2-52 kb; Schärfgrad 5(4 Prüfzyklen)
EN 60068-2-14 Na
DIN EN 60068-2-6 Fc
CE
cULus
UKCA
Drawings
Downloads
Data sheet