0.1 ... 1000 Hz
Relay + transistor
-
Overview
- Universal evaluation of pulse trains for overspeed and underspeed & rotational speed monitoring
- enables the detection of pulses, speeds or standstills of non-metallic objects
- 0.1...10 Hz/ 10...1000 Hz
- Start-up suppression 0.1 to 15 s
- can be set via potentiometer
Your advantages at autosen.com
- 30-day right of return
- 5-year warranty
- Super-fast delivery
- Over 20,000 satisfied customers
Description
autosen's position sensors can be combined with the AR003 evaluation system to detect pulses, speeds or standstills of non-metallic objects. Intuitive setting of the number of pulses, output function, hysteresis and start-up delay via potentiometer. There is one semiconductor output and one relay output. They open or close (function can be set) if the number of pulses is above or below (can also be set) the preset value. Switching and operating states are indicated via four LEDs. The integrated wide-range power supply for voltage supply from direct or alternating voltage guarantees high flexibility. A 24 V DC output supplies power to the connected sensors. Tried-and-tested millions of times in daily use. Pulse evaluation systems from autosen are manufactured according to the highest quality standards with regard to robustness, noise immunity and reliability. We offer you a 5-year warranty for our product – with money-back guarantee!Technical data AR003
General information
Universal evaluation of pulse sequences for exceeding and falling short of the nominal value; rotational speed monitoring
Yes
2 ranges preselectable, fine adjustment via potentiometer
0.1...10 Hz / 10...1000 Hz
Yes
2 ranges preselectable, fine adjustment via potentiometer
0.1...10 Hz / 10...1000 Hz
Outputs / inputs
PNP (type 2 per IEC 61131-2)
≤ 5000 (corresponding to the min. pulse/pause length 0.1 ms)
Yes
Yes
4 A (240 V AC, 24 V DC); resistive load
Reinforced (in accordance with EN 61010)
Yes
10...30 DC SELV
Yes
100
2 (≤ 240 V AC)
Relay (1 changeover contact); transistor output (pnp-switched; externally supplied)
II
≤ 5000 (corresponding to the min. pulse/pause length 0.1 ms)
Yes
Yes
4 A (240 V AC, 24 V DC); resistive load
Reinforced (in accordance with EN 61010)
Yes
10...30 DC SELV
Yes
100
2 (≤ 240 V AC)
Relay (1 changeover contact); transistor output (pnp-switched; externally supplied)
II
Electrical data
AC ± 20 % / DC ± 10 %
AC 6 W / DC 4 W
110 ... 240 AC / 27 (24) DC
AC 6 W / DC 4 W
110 ... 240 AC / 27 (24) DC
Mechanical data
No
Plastic: PC GF20
Plastic: PC GF20
Ambient conditions
-25 °C
60 °C
80 % (31 °C), decreasing linearly to 50 % (40 °C), non-condensing
IP20
IP21
60 °C
80 % (31 °C), decreasing linearly to 50 % (40 °C), non-condensing
IP20
IP21
Additional information
212 years
4 x LED
Yellow
Green
Connector plug: 4-pin with screw connection; (pack of 5)
CE
cULus
4 x LED
Yellow
Green
Connector plug: 4-pin with screw connection; (pack of 5)
CE
cULus
Drawings
1: plug-in screw terminals
2: label
3: potentiometer
4: Mounting on DIN rail
01: DC Supply voltage (+)
02: DC Supply voltage (+)
03: DC Supply voltage (-)
04: DC Supply voltage (-)
05: DC Sensor supply (+)
06: sensor signal 1 pnp
07: DC Sensor supply (-)
08: sensor signal 2 pnp
13: supply transistor output (+)
14: transistor output pnp
15: common External supply (-)
16: n.c.
17: Relay (normally open)
18: Relay (common)
19: Relay (normally closed)
20: n.c.
21: AC Supply voltage (L)
22: AC Supply voltage (L)
23: AC Supply voltage (N)
24: AC Supply voltage (N)
n.c. = not connected
Downloads
Data sheet
Customer reviews