Overview
- Ultrasonic sensor with stainless steel housing with M30 thread,
- Sensing range 600...8000 mm
- Programmable normally open/ normally closed
- Also detects levels and visually difficult-to-detect objects (high-contrast, reflective, transparent, dark, etc.) reliably and contactless, even in case of vapour and dust with high resolution
- self-cleaning sensor membrane
Industry 4.0 & IIoT
Discover a universe of new possibilities with smart solutions from autosen
Discover nowDescription
The AU010 measures distances reliably up to a range of 8m. The width of the sound beam can be set via the IO-Link and adjusted perfectly to the application. No matter if levels or objects with difficult optical properties (high contrast, reflective, transparent, dark) are to be detected – autosen's ultrasonic sensors even guarantee reliable high resolution object detection without contact in dust or fog.The self-cleaning sensor diaphragm transmits ultrasonic waves in short pulses and receives the reflected signal to calculate the distance to the nearest millimetre by means of the travel time of the sound. The new generation of ultrasonic sensors is extremely robust and very immune to interference. Equipped with an IO-Link interface, the sensors are perfectly fit for the future and for your Industry 4.0 application.
Note: When used with an analogue output use exclusively sensor cables without LED.
If you have questions regarding the IO-Link parameterization or want to use the parameterization service of autosen, please do not hesitate to contact us. Or start directly with the IO-Link starter kit ADS01.
Technical data AU010
General information
Ultrasonic sensor
1 Hz
600 ... 8000 mm
1 Hz
600 ... 8000 mm
Outputs / inputs
Normally open / Normally closed programmable
4 ... 20 mA
When used with an analog output use exclusively sensor cables without LED
Yes
4 ... 20 mA
When used with an analog output use exclusively sensor cables without LED
Yes
Electrical data
10 ... 30 V DC supply class 2 cULus
Direct voltage (DC)
PNP
100 mA
2.2 V
30 mA
III
Yes
Yes
Yes
0.3 s
Direct voltage (DC)
PNP
100 mA
2.2 V
30 mA
III
Yes
Yes
Yes
0.3 s
Mechanical data
Cylindrical with thread
M30x1.5
118.8 mm
V4A (1.4404)
Polyamide (PA)
Epoxy glass ceramic
M12
Contacts gold-plated
M30x1.5
118.8 mm
V4A (1.4404)
Polyamide (PA)
Epoxy glass ceramic
M12
Contacts gold-plated
Accuracy
< 1%
3 mm
± 4 °
Yes
The indicated values are reached after a warm-up time of min. 20 minutes
3 mm
± 4 °
Yes
The indicated values are reached after a warm-up time of min. 20 minutes
Ambient conditions
-20 °C
70 °C
IP67
70 °C
IP67
Additional information
107 years
Yellow
Green
2 x LED
Programming keys
2 fastening nuts
Yes
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
DIN EN 55011: Class A
DIN EN 60068-2-27
DIN EN 60068-2-6 Fc
CE
cULus
Yellow
Green
2 x LED
Programming keys
2 fastening nuts
Yes
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
DIN EN 55011: Class A
DIN EN 60068-2-27
DIN EN 60068-2-6 Fc
CE
cULus
Drawings
1: LED
2: Teachbutton
Pin 4 = IO-Link
Downloads
Data sheet Customer reviews