100 mm
PWM input
M12
Overview
- For pinpoint lighting of machines
- Total length 100 mm
- Dimming & switching thanks to PMW input
- 24V DC
- 30 cm pigtail with M12 connector, 3-pin
Description
The AB001 LED machine lamp provides pinpoint lighting for machines. It is distinguished by a particularly bright and uniform light as well as a chic design. The machine lamp has a total length of 100 mm and requires an operating voltage of 24 VDC. The connection is carried out using a 30 cm pigtail with M12 connector. The third pin of the connector is used as a PWM input and enables the device to be dimmed and switched directly from the controller.The machine lamp can be attached within seconds to metallic surfaces using the AA969 fixing kit. The machine lamp is, therefore, ideal for use on tool machines or generally suitable for use in factory automation. Thanks to the high protection rating of IP67, the machine lamp functions safely and reliably even in harsh operating conditions.
Technical data AB001
General information
Lighting for machines
white 5000K
85
120°
white 5000K
85
120°
Outputs / inputs
24VDC up to 15kHz
allows dimming and switching
No
allows dimming and switching
No
Electrical data
110 mA
2,7 W
450 lx
200 lx
620 lm
24 V DC ± 10 %
Direct voltage (DC)
III
Yes
2,7 W
450 lx
200 lx
620 lm
24 V DC ± 10 %
Direct voltage (DC)
III
Yes
Mechanical data
80 mm x 25 mm
100 mm
Aluminium anodised
M12
With pigtail
3-pin
0.3 m
100 mm
Aluminium anodised
M12
With pigtail
3-pin
0.3 m
Ambient conditions
-25 °C
50 °C
30g / 10–55Hz, 1mm
IP67
50 °C
30g / 10–55Hz, 1mm
IP67
Additional information
CE
Drawings
I : Standard operation with pin 4 as switch : 1 = on / 0 = off
II : Operation with dimmable luminosity using PWM signal on pin 4
Downloads
Data sheet Customer reviews
