480 mm 
PWM input
M12
Overview
- for precise illumination of machines
- Overall length 480 mm
- Dimming & switching thanks to PWM input
- 24V DC
- 30 cm pigtail with M12 connector, 3-pin
Your advantages at autosen.com
- 30-day right of return
- 5-year warranty
- Super-fast delivery
- Over 20,000 satisfied customers
Description
The LED machine light AB003 provides precise illumination for machines. It is distinguished by a particularly bright and uniform light as well as a chic design. The machine light has a total length of 480 mm and requires an operating voltage of 24 VDC. The connection is carried out using a 30 cm pigtail with an M12 plug. The third pin of the plug is used as a PWM input and enables the device to be dimmed and switched directly from the controller.The machine light can be attached within seconds to metallic surfaces using the attachment kit AA969. The machine light is therefore ideal for use on tool machines or generally suitable for use in factory automation. Thanks to the high protection rating of IP67, the machine light functions safely and reliably even in harsh environmental conditions.
Technical data AB003
General information
Lighting for machines
white 5000K
85
120°
white 5000K
85
120°
Outputs / inputs
24VDC up to 15kHz
Dimming and switching thanks to PWM input
No
Dimming and switching thanks to PWM input
No
Electrical data
900 mA
21.6 W
4000 lx
1170 lx
2750 lm
24 V DC ± 10 %
Direct voltage (DC)
III
Yes
21.6 W
4000 lx
1170 lx
2750 lm
24 V DC ± 10 %
Direct voltage (DC)
III
Yes
Mechanical data
452 mm x 32 mm
480 mm
Aluminium anodised
M12
With pigtail
3-pin
0.3 m
480 mm
Aluminium anodised
M12
With pigtail
3-pin
0.3 m
Ambient conditions
-25 °C
50 °C
30g / 10–55Hz, 1mm
IP67
50 °C
30g / 10–55Hz, 1mm
IP67
Additional information
CE
Drawings
I : Standard operation with pin 4 as switch : 1 = on / 0 = off
II : Operation with dimmable luminosity using PWM signal on pin 4
Downloads
Data sheet
Customer reviews
