AD010Universal IO-Link sensor/actuator module

Range of application Connection of up to 8 binary/analogue sensors to an io-key or IO-Link master port. Ports of the module can also be used as digital outputs.
External power supply Yes
Parametrisation options Input signal: debounce, hold, invert

Total number of inputs and outputs 16; configurable
Number of analogue inputs 8; configurable (4-20 mA / 0-10 V)
Number of digital outputs 16; (max. current load 1.8 A per output / 3.6 A total)
Number of digital inputs 16; (8 x 2 PNP type 2 according to IEC 61131-2)
IO-Link Yes

Total current carrying capacity 3600 mA
Current carrying capacity per output 1800 mA
Power supply at the ports 18 ... 30 V DC V
Max. current consumption from additional supply 4000 A
Operating voltage 18 ... 30 V DC
Voltage type Direct voltage (DC)
Current consumption max. 100 mA
Protection class III
Short-circuit protection Yes

Material of housing Polyamide (PA)
Nickel-plated brass
Electrical connection M12
4-pin

Resolution measuring input 16 bit

Ambient temperature min. -25 °C
Ambient temperature max. 60 °C
Max. permitted relative humidity 90 %
Max. Height above sea level [m] 2000
Protection rating IP65
IP67
Contamination level 2

Function display Operation: LED, green
Fault: LED, red
Function: LED, yellow
EMC test DIN EN 61000-6-2
DIN EN 61000-6-3
IEC 61131-9
Shock resistance test DIN EN 60068-2-27
Vibration resistance test DIN EN 60068-2-6
DIN EN 60068-2-64
Approval CE
UKCA

Dimensional drawing
Connection & pin assignment