IP65
-40 ... 200 °C
50 mmOverview
- robust and cost-effective solution for temperature monitoring
- PT100 measuring element, Class A
- The diameter of the protective tube is 6 mm
- suitable for the temperature monitoring of vessels and pipes in liquid and gaseous media
- Protection rating IP65
Description
The screw-in temperature sensor AT108 is a robust and cost-effective solution for the temperature monitoring of liquid and gaseous media. The Class A Pt100 measuring element in the stainless steel sleeve with G1/2" connection and an installation length of 50 mm is embedded in thermal paste for an excellent response time and is suitable for liquid and gaseous media. The AT108 can be used flexibly in a wide temperature range of -40...+200°C. The measuring element is connected using a standardised M12 connector and is implemented as a 4-wire circuit.Technical data AT108
General information
200 °C
-40 °C
No
-40 °C ... 200 °C
-25 °C ... 85 °C
40 bar
-40 °C
No
-40 °C ... 200 °C
-25 °C ... 85 °C
40 bar
Electrical data
III
Mechanical data
V2A (1.4305)
Copper
Pt100, tolerance class A as per DIN EN 60751
6 mm
V2A (1.4305)
Copper
M12
4-pin
External thread
G 1/2
50 mm
Copper
Pt100, tolerance class A as per DIN EN 60751
6 mm
V2A (1.4305)
Copper
M12
4-pin
External thread
G 1/2
50 mm
Accuracy
T05 = 5 s / T09 = 12 s
Ambient conditions
IP65
Additional information
No
Seal
Seal
Drawings
Pt100
°C - Temperature
Ω - Resistance
Downloads
Data sheet Customer reviews
