Questions?

See our FAQ.

+49 201 749189-21
Monday to Friday 8 am - 5 pm (CET)

AT106Screw-in thermocouple Pt100 G1/4A

IP65

-40 ... 200 °C

50 mm

Go to customer reviews(15)

Caution! Item discontinued!

This article has expired and can no longer be ordered. The article was replaced by the following article:

AT114Screw-in temperature sensor PT100 G1/4 male -50…180°C

Please check the technical data on the basis of the data sheet, as these may differ slightly. If you have any questions, please call +49 (0)201 749 189 21 or send an e-mail to [email protected]

Matching accessories Technical data Downloads

Overview

robust and cost-effective solution for temperature monitoring
PT100 measuring element, Class A
The diameter of the protective tube is 6 mm
suitable for the temperature monitoring of vessels and pipes in liquid and gaseous media
Protection rating IP65

Description

The screw-in temperature sensor AT106 is a robust and cost-effective solution for the temperature monitoring of liquid and gaseous media. The Class A Pt100 measuring element in the stainless steel sleeve with G1/4" connection and an installation length of 50 mm is embedded in thermal paste for an excellent response time and is suitable for liquid and gaseous media. The AT106 can be used flexibly in a wide temperature range of -40...+200°C. The measuring element is connected using a standardised M12 connector and is implemented as a 4-wire circuit.

Technical data AT106

General information

Temperature range max. 200 °C
Temperature range min. -40 °C
Dew point resilience No
Measuring tip temperature range -40 °C ... 200 °C
Temperature range plug -25 °C ... 85 °C
Pressure resistance 40 bar

Electrical data

Protection class III

Mechanical data

Materials in contact with the medium V2A (1.4305)
Copper
Sensor element Pt100, tolerance class A as per DIN EN 60751
Thermowell 6 mm
Material of housing V2A (1.4305)
Material of seal Copper
Electrical connection M12
4-pin
Process connection External thread
G 1/4
Installation length 50 mm