- Ultrasonic sensor with stainless steel housing with M18 thread,
- Sensing range 100...900 mm
- Programmable normally open/ normally closed
- Also detects levels and visually difficult-to-detect objects (high-contrast, reflective, transparent, dark, etc.) reliably and contactless, even in case of vapour and dust with high resolution
- self-cleaning sensor membrane
DescriptionNo matter if levels or objects with difficult optical properties (high contrast, reflective, transparent, dark) are to be detected – autosen's ultrasonic sensors even guarantee reliable high resolution object detection without contact in dust or fog. The self-cleaning sensor diaphragm transmits ultrasonic waves in short pulses and receives the reflected signal to calculate the distance to the nearest millimetre by means of the travel time of the sound. The new generation of ultrasonic sensors is extremely robust and very immune to interference. Equipped with an IO-Link interface, the sensors are perfectly fit for the future and for your Industry 4.0 application.
With our AA965 sonic tube you can reduce the sound lobe and thus adjust the measuring range. Information on the changed shape of the sound lobe can be found further down in the Knowledge section.
Note: When used with an analogue output use exclusively sensor cables without LED.
If you have questions regarding the IO-Link parameterization or want to use the parameterization service of autosen, please do not hesitate to contact us. Or start directly with the IO-Link starter kit ADS01.
Technical data AU005
100 ... 900 mm
Outputs / inputs
4 ... 20 mA
When used with an analog output use exclusively sensor cables without LED
Direct voltage (DC)
Epoxy glass ceramic
± 4 °
2 x LED
2 fastening nuts
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
DIN EN 55011: Class A
DIN EN 60068-2-27
DIN EN 60068-2-6 Fc
Pin 4 = IO-Link