Overview
- IO-Link significantly expands the range of sensor functions Definition of limit values, including warning signal when defined values are exceeded/undercut; can be parameterised as normally open/ normally closed, PNP/NPN switching and as a measuring system with a variably settable switching output
- reliable transmission of the distance & smallest distance changes as a linearised process value via IO-Link
- Settable switch point 2.4...12.1 mm; non-flush mountable
- Programmable normally open/ normally closed
- Protection rating IP65/ IP66/ IP67/ IP68/ IP69k; excellent temperature stability
Industry 4.0 & IIoT
Discover a universe of new possibilities with smart solutions from autosen
Discover nowDescription
The inductive sensor AI404 is a high-quality inductive proximity sensor with IO-Link which was manufactured according to the German quality standard. It is a sensor, design M18, which is non-flush mountable with a metal thread. The range of functions of the sensor is expanded significantly by IO-Link. The switching sensor can be parametrised as an NO/NC, PNP-/NPN-switching and as a measuring system with variably adjustable switching output. This reduces the wide range of versions and storage costs.The AI404 can measure the smallest changes in distance with very great precision and output the measured value via IO-Link. IO-Link also allows the definition of limit values; if they are exceeded or drop below the minimum, the sensor outputs a warning signal. The extensive range of functions allows universal and permanent applicability with increased sensing range and good temperature stability. Even in harsh environmental conditions the sensor functions reliably thanks to the large temperature range of -40 to 85°C and the high protection ratings of IP66, IP68 and IP69K.
If you have questions regarding the IO-Link parameterization or want to use the parameterization service of autosen, please do not hesitate to contact us. Or start directly with the IO-Link starter kit ADS01.
Technical data AI404
General information
2.4 ... 12.1 mm
1.3 ... 13 mm*
In combination with autosen:io (AD002) parametrisation of sensors with IO-Link interface
Inductive sensor
300 Hz
12.1 mm
*The Measuring range can be output as linearized process value via IO-Link
1.3 ... 13 mm*
In combination with autosen:io (AD002) parametrisation of sensors with IO-Link interface
Inductive sensor
300 Hz
12.1 mm
*The Measuring range can be output as linearized process value via IO-Link
Outputs / inputs
Normally open / Normally closed programmable*
Factory setting: normally open
Normally open/ normally closed parameterisable via IO-Link
Yes
Factory setting: normally open
Normally open/ normally closed parameterisable via IO-Link
Yes
Electrical data
10 ... 30 V DC
Direct voltage (DC)
PNP
NPN*
*IO-Link parameterisation
100 mA
2.5 V
10 mA
III
Yes
Yes
Yes
Direct voltage (DC)
PNP
NPN*
*IO-Link parameterisation
100 mA
2.5 V
10 mA
III
Yes
Yes
Yes
Mechanical data
Cylindrical with thread
M18x1
Not flush
60 mm
Brass coated with white bronze
PBT
M12
3-pin
Contacts gold-plated
M18x1
Not flush
60 mm
Brass coated with white bronze
PBT
M12
3-pin
Contacts gold-plated
Accuracy
St37 = 1
V2A approx. 0.7
Ms approx. 0.5
Al approx. 0.5
Cu approx. 0.4
3 ... 15 % of the real switching distance Sr
V2A approx. 0.7
Ms approx. 0.5
Al approx. 0.5
Cu approx. 0.4
3 ... 15 % of the real switching distance Sr
Ambient conditions
-40 °C
85 °C
IP65
IP66
IP67
IP68
IP69k
85 °C
IP65
IP66
IP67
IP68
IP69k
Additional information
664 years
Switching status: LED, yellow
2 fastening nuts
DIN EN 55011: Class B
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
DIN EN 60068-2-27 Ea
EN 60068-2-29 Eb
EN 60068-2-14 Na
DIN EN 60068-2-6 Fc
CE
cULus
Switching status: LED, yellow
2 fastening nuts
DIN EN 55011: Class B
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
DIN EN 60068-2-27 Ea
EN 60068-2-29 Eb
EN 60068-2-14 Na
DIN EN 60068-2-6 Fc
CE
cULus
Drawings
Downloads
Data sheet Customer reviews