Open end
Flush
1000 Hz
Overview
- Response sensitivity 2.1 mT
- Travel speed >10 m/s
- ideally suited for applications in packaging/handling and special machine construction
- Self-locking fixture for easy mounting and adjustment and particularly fast and safe commissioning due to 3-wire connection technology
- Various mounting options on different cylinder types thanks to our adapter range
Your advantages at autosen.com
- 30-day right of return
- 5-year warranty
- Super-fast delivery
- Over 20,000 satisfied customers
Description
The AZ006 cylinder sensor with reed contact is suitable for quick and easy installation in most common T-slots due to its self-locking fixture. With a response sensitivity of 2.1 mT and a travel speed of 10 m/s, our cylinder sensors are ideally suited for applications in packaging, handling and special machine construction. The AZ006 provides very high switching frequencies and can be used for applications with high load currents thanks to the three-wire connection. During installation, the cylinder sensor is simply dropped from the top into the slot.The 2 m long PUR cable with open connecting lines is used for the electrical connection. The operating voltage is between 5...50 AC/DC and an external protective circuit for inductive loads (valve, contactor, etc.) is necessary. Please note that safe operation can only be guaranteed with a miniature fuse in accordance with IEC60127-2 Sheet 1 (= 0.75 A fast DC operation, = 0.6 A fast AC operation).
Our wide range of adapters enables connection to various cylinder types. Installation accessories and further information can be found further down on the item detail page.
Technical data AZ006
General information
1000 Hz
Outputs / inputs
Normally open (NO)
Electrical data
Miniature fuse to IEC60127-2 sheet 1; ≤ 0,75 A; fast acting; DC operation; ≤ 0,6 A; fast acting; AC operation
10 W
5...50 V AC/DC; (External protective circuit for inductive load (valve, contactor, etc.) necessary.; "supply class 2" to cULus)
Direct voltage (DC)
Alternating voltage (AC)
PNP
DC: 500 mA / AC: 350 mA
1 V
III
No
No
No
10 W
5...50 V AC/DC; (External protective circuit for inductive load (valve, contactor, etc.) necessary.; "supply class 2" to cULus)
Direct voltage (DC)
Alternating voltage (AC)
PNP
DC: 500 mA / AC: 350 mA
1 V
III
No
No
No
Mechanical data
Stainless steel
Cuboid
Flush
30.5 mm
PA
Open cable
PUR
2 m
Cuboid
Flush
30.5 mm
PA
Open cable
PUR
2 m
Accuracy
1 mm
2,1 mT
< 0.2 mm
> 10 m/s
0.1 ms
0.6 ms
2,1 mT
< 0.2 mm
> 10 m/s
0.1 ms
0.6 ms
Ambient conditions
-25 °C
70 °C
IP65
IP67
70 °C
IP65
IP67
Additional information
20385 years
Switching status: LED, yellow
1 rubber placeholder
1 cable clip
DIN EN 55011: Class B
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
CE
cULus
Switching status: LED, yellow
1 rubber placeholder
1 cable clip
DIN EN 55011: Class B
DIN EN 61000-4-2 ESD
DIN EN 61000-4-3 HF radiated
DIN EN 61000-4-4 burst
DIN EN 61000-4-6 HF grid-bound
CE
cULus
Drawings
1: Fastening clamp
2: sensing face
Note miniature fuse to IEC60127-2 sheet 1
≤ 0.75 A fast acting DC operation
≤ 0.6 A fast acting AC operation
Downloads
Data sheet
Customer reviews
