Power supply and signal evaluation (for sensors, etc.); 1 channel
Overview
- 1-channel switching amplifier (relay, 1 changeover contact)
- Protection rating IP20
- for power supply and signal evaluation of sensors
- short-circuit and overload proof
- for PNP and NPN switching sensors
Description
The 1-channel switching amplifier AN001 is used for the current supply and signal evaluation of sensors. It has a 24V DC / 300 mA output, DIN rail mounting and is short-circuit proof and overload protected. The unit is suited for PNP and NPN-switching sensors.Tried-and-tested millions of times in daily use. Switching amplifiers from autosen are manufactured according to the highest quality standards with regard to robustness, noise immunity and reliability. We offer you a 5-year warranty for our product – with money-back guarantee!
Technical data AN001
General information
Power supply and signal evaluation (for sensors, etc.); 1 channel
PNP / NPN
Potentiometer
10 Hz
PNP / NPN
Potentiometer
10 Hz
Outputs / inputs
Sensor signal; PNP/NPN; 10 ... 30 DC SELV
=< 10 Hz (power-on time 50 %)
Yes
Yes
2 (≤ 240 V AC)
Relay (1 changeover contact)
=< 10 Hz (power-on time 50 %)
Yes
Yes
2 (≤ 240 V AC)
Relay (1 changeover contact)
Electrical data
AC ± 20 %
=< 11 W
24 DC SELV, ± 10 %, 300 mA
4 A (240 V AC, 24 V DC); resistive load
Reinforced (in accordance with EN 61010)
110 ... 240 AC
PNP
NPN*
*Potentiometer
=< 11 W
24 DC SELV, ± 10 %, 300 mA
4 A (240 V AC, 24 V DC); resistive load
Reinforced (in accordance with EN 61010)
110 ... 240 AC
PNP
NPN*
*Potentiometer
Mechanical data
Yes
80 % (31 °C), decreasing linearly to 50 % (40 °C), non-condensing
Plastic: PC GF20
80 % (31 °C), decreasing linearly to 50 % (40 °C), non-condensing
Plastic: PC GF20
Ambient conditions
-20 °C
60 °C
IP20
60 °C
IP20
Additional information
LED
Yellow
Green
Red
Connector plug: 4-pin with screw connection; (pack of 3)
CE
cULus
Yellow
Green
Red
Connector plug: 4-pin with screw connection; (pack of 3)
CE
cULus
Drawings
1: plug-in screw terminals
2: label
3: potentiometer
4: Mounting on DIN rail
05: Relay (normally open)
06: Relay (common)
07: Relay (common)
08: Relay (normally closed)
09: DC Sensor supply (+)
10: sensor signal pnp/npn
11: n.c.
12: DC Sensor supply (-)
21: AC Supply voltage (L)
22: AC Supply voltage (L)
23: AC Supply voltage (N)
24: AC Supply voltage (N)
n.c. = not connected
Downloads
Data sheet Customer reviews
