AN004Multifunction relay for sensors
7-segment display
Multifunctional input
2 relays
NET PRICE (plus VAT)
149.64 €
Offline: 158.35 €
GROSS PRICE (incl. VAT)
178.07 €
Offline: 188.43 €
Incl. 5.50 % online discount
50+ in stock!
Overview
- 230 VAC operating voltage - conversion to 24 VDC sensor supply
- Input for various sensor signals (current, voltage, frequency, pulses, PT100/PT1000 and thermocouples)
- LED display and programming buttons
- Up to 8 adjustable alarms and 2 relay outputs
- Built for DIN rail in control cabinet
Description
The autosen multifunction relay AN004 can process sensor signals of (almost) all sensor types, display measured values locally and realize simple controls via relays. The design is especially made for DIN rail mounting. Sensors with different signal forms can be connected (current, voltage, frequency, pulses, PT100/PT1000 and thermocouples). The device can display the measured value on a 3-digit LED display. Programming is done via the three programming keys. Up to 8 alarms can be set and transferred via two relay outputs to higher-level systems.Best quality manufactured under the highest quality standards in terms of robustness, noise immunity and reliability - Made in Germany / 5-year warranty.
Technical data AN004
General information
Display and monitoring of sensor signals
Current, voltage, PT100(0), thermocouples, frequency, speed, counter, TTL, PNP, NPN, NAMUR
See the operating instructions
0...10,000 Hz
Current, voltage, PT100(0), thermocouples, frequency, speed, counter, TTL, PNP, NPN, NAMUR
See the operating instructions
0...10,000 Hz
Outputs / inputs
Yes
Yes
Multifunction input
2
1
No
Yes
Multifunction input
2
1
No
Electrical data
± 10%
50 mA(30VDC)
2 A (30 V DC)
2
110 ... 240 AC
Alternating voltage (AC)
50 mA(30VDC)
2 A (30 V DC)
2
110 ... 240 AC
Alternating voltage (AC)
Mechanical data
DIN-rail
Plug-in terminal: max. 1.5 mm²
22,5 x 117,2 x 107 mm
PA 6.6
UL94V-0
Plug-in terminal: max. 1.5 mm²
22,5 x 117,2 x 107 mm
PA 6.6
UL94V-0
Accuracy
Analogue input: 0.2 % ± 1 digit
Thermocouple: 0.3 % ± 1 digit
PT100(0): 0.5 % ± 1 Digit
Thermocouple: 0.3 % ± 1 Digit
PT100(0): 0.1 K
14 bits at 1s measuring time
See the operating instructions
Thermocouple: 0.3 % ± 1 digit
PT100(0): 0.5 % ± 1 Digit
Thermocouple: 0.3 % ± 1 Digit
PT100(0): 0.1 K
14 bits at 1s measuring time
See the operating instructions
Ambient conditions
-20 °C
50 °C
85 %
IP20
50 °C
85 %
IP20
Additional information
Programming keys
Digit height 7 mm
7-segment LED display: 3-digit, red
No accessories included
EN 61326
CE
UKCA
Digit height 7 mm
7-segment LED display: 3-digit, red
No accessories included
EN 61326
CE
UKCA
Drawings
11: L+ /L
12: nc
13: nc
14: L- /N
21: S1 relay output
22: S1 relay output
23: S2 relay output
24: S2 relay output
51: Digital input -
52: Digital input +
53: Auxiliary energy for sensor system -
54: Auxiliary energy for sensor system +
61: 1V, 2V, mA, Freq, Pt100(0)
62: 50mV, TC, PT100, Reset
63: GND, Pt100(0)
64: 10V, PNP
Downloads
Data sheet 