7-segment LED
Analogue input
-
Overview
- Input for analog standard signals (0/4-20 mA or 0-10 V)
- High visibility LED display with labeling field for the unit of measurement
- Configuration by means of 3 front keys
- Indicator flashing in case of alarm - no outputs
- Low installation depth and high protection class IP65
Description
The LED display AG001 is used for local measured value display of analog standard signals. The design 96x48 mm with low installation depth is ideal for installation in a standard panel cutout. The measuring input can process analog current and voltage signals (0/4-20 mA / 0-10 VDC). The measured value is displayed locally via the 4-digit digital display and offers very good visibility from any viewing angle. The scaling of the measurement signal, offset, access lock with password protection and other settings can be adjusted via programming. The paper slot at the bottom right offers an additional labeling option for the unit of measurement or application description.Best quality manufactured under the highest quality standards in terms of robustness, noise immunity and reliability - Made in Germany / 5-year warranty.
Technical data AG001
General information
Display of analogue standard signals
Outputs / inputs
No
4...20 mA
0...20 mA
0...10 V
1
No
4...20 mA
0...20 mA
0...10 V
1
No
Electrical data
24 V DC ± 10 %
Direct voltage (DC)
40 mA
III
Direct voltage (DC)
40 mA
III
Mechanical data
Panel cutout
92 x 45 mm
Yes
Screw terminals: 0.25 ... 2.5 mm²
48 x 109 x 42 mm
PC
EPDM
92 x 45 mm
Yes
Screw terminals: 0.25 ... 2.5 mm²
48 x 109 x 42 mm
PC
EPDM
Accuracy
0,1 % ± 1 digit
18 bit at 1s measuring time
18 bit at 1s measuring time
Ambient conditions
0 °C
60 °C
80 %
2000
IP65 (on the front)
IP00
60 °C
80 %
2000
IP65 (on the front)
IP00
Additional information
Programming keys
Digit height: 15 mm
7-segment LED display: 4-digit, red
2 fastening elements
EN 61326
CE
UKCA
Digit height: 15 mm
7-segment LED display: 4-digit, red
2 fastening elements
EN 61326
CE
UKCA
Drawings
1: 7-segment LED display
2: Programming button
3: Programming button
4: Programming button
5: Label field
6: Fixing element
7: Seal *Installation depth including terminals
Downloads
Data sheet Customer reviews
