AS005Flow sensor Programmable M18x1 , 5I

  • M18 x 1.5 F

  • 0.04 ... 3 m/s

  • -20 ... 90 °C
Go to customer reviews(10)
Order by 2 pm CET - Shipping on the same working day
214.06 226.52
Incl. 5,5 % online discount
plus VAT plus shipping costs
Important information for customers outside Germany
Quantity
34 in stock!

Overview

  • For water, air, oils, glycol solutions, low-viscosity oils; different sensitivity curves can be programmed depending on the medium
  • Colour display signals at first glance whether the process is running within the target range
  • with IO-Link
  • extremely robust and more resistant to malfunctioning
  • Protection rating IP65/ IP67
io cloud compatible

Industry 4.0 & IIoT

Discover a universe of new possibilities with smart solutions from autosen

Discover now

Description

The all-rounder. Flow and temperature are measured simultaneously via two different outputs. The AS005 does not only monitor water, but also oils or gases. Depending on the medium, different sensitivity curves can be programmed. The colour display shows at first glance whether the process is within the range.

The new generation of flow sensors is extremely robust and very immune to interference. Equipped with an IO-Link interface, the sensors are perfectly fit for the future and for your Industry 4.0 application.

Tried-and-tested millions of times in daily use. Flow sensors from autosen are manufactured in Germany according to highest quality demands with regard to robustness, noise immunity and reliability. We offer you a 5-year warranty for our product – with money-back guarantee!

Note: When used with an analogue output use exclusively sensor cables without LED.

If you have questions regarding the IO-Link parameterization or want to use the parameterization service of autosen, please do not hesitate to contact us. Or start directly with the IO-Link starter kit ADS01.

Technical data AS005

General information

Water; glycol solutions; air; oils low-viscosity oils with viscosity: = 40 mm²/s (40 °C) high-viscosity oils with viscosity: > 40 mm²/s (40 °C)
2 ... 100 m/s
0.04 ... 3 m/s
Hysteresis / window
Normally open / Normally closed
Switching logic
Current /frequency output
Media selection
Damping
Teach function
Display rotates / can be switched off
Standard unit of measure
Colour of process value
-20 °C
90 °C
0 ... 6 m/s (liquid) | 0 ... 200 m/s (gaseous)

Outputs / inputs

2 x normally closed / normally open programmable
4 ... 20 mA
Programmable
Scalable
When used with an analog output use exclusively sensor cables without LED
Yes

Electrical data

18 ... 30 V DC
Direct voltage (DC)
PNP
NPN*
*Programming buttons
*IO-Link parameterisation
250 mA
2.5 V
100 mA
III
Yes
Yes
Yes

Mechanical data

V4A (1.4404)
FKM
25 Nm
V4A (1.4404)
V2A (1.4310)
PBT-GF 20
PBT-GF 30
M12
4-pin
Contacts gold-plated
100 bar
For adapter
Internal thread
M18 x 1.5

Accuracy

0.02 m/s * | 0.2 °C
0.05 m/s *
1,5 s * (for temperature monitoring)
* applies to water
** MV = measured value, MREV = measurement range end value
± (7 % MV+ 2 % MREV) ** | ± 0.3 °C / ± 1 °C
Water: 0.5 s; glycol: 0.8 s; air: 7 s; oil: 1.8 s (T09 for flow monitoring in each case)

Ambient conditions

-40 °C
80 °C
IP65
IP67

Additional information

212 years
LED
Yellow
Green
Programming keys
4-digit display
Red / green display
No accessories included
DIN EN 60947-5-9
DIN EN 60068-2-27
DIN EN 60068-2-6
CE
cULus

Drawings


1: LEDs (display unit / switching status)
2: 4-digit alphanumeric display
3: Programming button
4: Upper part of the housing can be rotated by 345°

Related products