- Through beam sensor (receiver; transmitter: AO008) in rectangular design with M12 connector (2-pin)
- Sensing range 20 m
- Easy adjustment due to visible red light
- Insensitive to dust, steam and lens contamination
- Protection rating IP67
DescriptionThrough-beam receiver in rectangular design with 20 m range Through-beam sensors feature very long detection ranges since they consist of two separate components: transmitter and receiver. The optical receiver AO008 from autosen switches reliably up to a range of 20 m. The visible red light allows easy adjustment of the through-beam system. The light beam is a one-way beam and thus highly resistant to dust, steam or lens soiling. This guarantees high excess gain. The optical receiver AO008 from autosen can be used together with the optical transmitter AO007.
Tried-and-tested millions of times in daily use. Photoelectric sensors from autosen are manufactured in Germany according to highest quality demands with regard to robustness, noise immunity and reliability. Save up to 50 % compared to other manufacturers, benefit from the 30-day right to return and 5-year warranty for our products.
For further technical details as well as suitable accessories (sensor cables AA005, AA006, AA007, AA008; angle bracket AA906 and transmitter AO007) please see the detailed data sheet – at autosen.com.
Technical data AO008
Outputs / inputs
Direct voltage (DC)
Switching status: LED, yellow
DIN EN 60947-5-2
the max. tightening torque is 2 Nm
1: When a M5 mounting screw is used, the max. tightening torque is 2 Nm, Receiver in upper lens, transmitter in lower lens