Overview
- controls communication between IO-Link sensor and PLC
- Installation in control cabinet or directly in the field
- Coupling of the sensor to the master via a maximum 20 m long, unshielded sensor cable
- Master ensures digital signal transmission (binary switching, analogue input/output, parameters) to the PLC or to the parameter setting software
- Protection rating IP65/ IP67

Industry 4.0 & IIoT
Discover a universe of new possibilities with smart solutions from autosen
Discover now
Description
One master for everything. IO-Link offers many advantages. The communication between the IO-Link sensor and the PLC is controlled by the IO-Link master. The master is either installed in the control cabinet or directly in the field. The IO-Link sensor is connected to the master using an unscreened sensor cable that is not longer than 20 metres. The master ensures digital signal transmission (binary switching, analogue input/output, parameters) to the PLC or to the parameter setting software autosen:io. For daily use – one master for everything. IO-Link technology from autosen is manufactured according to the highest quality standards with regard to robustness, noise immunity and reliability. We offer you 5-year warranty for our products – with money-back guarantee!
Technical data AD001
General information
Input/output in field applications for power supply and as communication interface
Ethernet
IO-Link
PROFINET IO
In combination with autosen:io (AD002) parametrisation of sensors with IO-Link interface
Ethernet
IO-Link
PROFINET IO
In combination with autosen:io (AD002) parametrisation of sensors with IO-Link interface
Outputs / inputs
2 x Ethernet (Profinet) IN / OUT (X21, X22)
Power supply IN (X31)
4: (IO-Link Port Class A: 4 x 1) | (X01 - X04)
Low: 0 ... 5 V | High: 11 ... 30 V
8: 4 digital inputs on pin 2 / 4 additional inputs on pin 4 (IO-Link)
COM 1 / COM 2 / COM 3
1.1
4
Yes
Power supply IN (X31)
4: (IO-Link Port Class A: 4 x 1) | (X01 - X04)
Low: 0 ... 5 V | High: 11 ... 30 V
8: 4 digital inputs on pin 2 / 4 additional inputs on pin 4 (IO-Link)
COM 1 / COM 2 / COM 3
1.1
4
Yes
Electrical data
20 ... 30 V DC
Direct voltage (DC)
3600 mA
200 ma
300 ... 3900 mA
III
Yes
Direct voltage (DC)
3600 mA
200 ma
300 ... 3900 mA
III
Yes
Mechanical data
Polyamide (PA)
Nickel-plated brass
M12
4-pin
Nickel-plated brass
M12
4-pin
Ambient conditions
-25 °C
60 °C
IP65
IP67
60 °C
IP65
IP67
Additional information
90 years
LED
Yellow
Green
Red
No accessories included
DIN EN 61000-6-2
DIN EN 61000-6-4
For further information please refer to the operating instructions
CE
LED
Yellow
Green
Red
No accessories included
DIN EN 61000-6-2
DIN EN 61000-6-4
For further information please refer to the operating instructions
CE
Drawings


Downloads
Data sheet
Customer reviews