AP203Flush pressure sensor G1/2A

  • G 1/2 M

  • 0 bar ... 25 bar

  • Analogue output

Order by 2 pm CET - Shipping on the same working day
139.90 148.04
Incl. 5,5 % online discount
plus VAT plus shipping costs
Important information for customers outside Germany
Quantity
50+ in stock!

Overview

  • Pressure sensor with flush-mounted measuring cell (ceramic-capacitive measuring principle)
  • Fixed measuring range from 0 to 25 bar
  • With analogue output, G1/2 process connection with external thread and M12 plug connection (2-pole)
  • also applicable in pasty and contaminated media
  • high temperature resistance
  • robust stainless steel housing
  • protection class IP67
  • Very good repeatability

Your advantages at autosen.com

  • 30-day right of return
  • 5-year warranty
  • Super-fast delivery
  • Over 10,000 satisfied customers
Everything about autosen

Description

The electronic pressure sensor AP203 was designed for use in the industrial process industry. The sensor has a fixed measuring range of 0 ... 25 bar. The device is equipped with an analogue output, a G1/2 male process connection (according to DIN EN ISO 1179-2) and an M12 connector.

The flush-mounted design of the ceramic-capacitive measuring cell enables use in pasty and contaminated media - e.g. glue, paint, foam or sludge. These media harden in the dead spaces of transmitters without a flush diaphragm and block the process connection.

A high temperature resistance as well as the compact and robust stainless steel housing with protection class IP67 allow the use in harsh environments. In addition, the sensor is characterised by very good repeatability, low characteristic curve deviation and a cost-optimal price-performance ratio.

Technical data AP203

General information

Relative pressure
0 bar
25 bar
75 bar
Flush
External thread
G 1/2

Outputs / inputs

4 ... 20 mA
When used with an analog output use exclusively sensor cables without LED
No

Electrical data

10 ... 30 V DC
Direct voltage (DC)
23 mA
Yes
Yes

Mechanical data

V4A (1.4404)
FPM
Al2O3 (ceramic)
V4A (1.4404)
M12
2-pin

Accuracy

0.1 % FS*
incl. zero point, full scale, linearity, hysteresis and repeatability
± 0.3 % FS*
± 0,15 % FS*
± 0.25 % FS*
*FS: Fullscale

Ambient conditions

-25 °C
85 °C
-25 ... 125 °C °C
IP65

Additional information

No
DIN EN 61326-2-1
DIN EN 50178
DIN EN 60068-2-27
DIN EN 60068-2-6
CE

Drawings



OUT: analogue output 4 ... 20 mA
Downloads
Data sheet
Related products