Power supply and signal evaluation; two-point control of levels; 2 channels
Overview
- 2-channel switching amplifier (relay, 1 changeover contact; transistor output (PNP-switched; externally supplied))
- Protection rating IP20
- for power supply and signal evaluation of sensors
- Input delay 0...10 s
Description
The level control relay is used for two-point control of levels. It has a housing for DIN rail mounting and provides an input delay of 0 ... 10 s. Switching outputs: Relay (1 changeover contact); transistor output (PNP-switched; externally supplied).Tried-and-tested millions of times in daily use. Switching amplifiers from autosen are manufactured according to the highest quality standards with regard to robustness, noise immunity and reliability. We offer you a 5-year warranty for our product – with money-back guarantee!
Technical data AN002
General information
Power supply and signal evaluation; two-point control of levels; 2 channels
1 ... 10 s
Potentiometer
Input delay
1 ... 10 s
Potentiometer
Input delay
Outputs / inputs
2 x sensor signals; PNP; 10 ... 30 DC SELV
=< 5 Hz
Yes
Yes
Yes
2 (≤ 240 V AC)
Relay (1 changeover contact); transistor output (pnp-switched; externally supplied)
=< 5 Hz
Yes
Yes
Yes
2 (≤ 240 V AC)
Relay (1 changeover contact); transistor output (pnp-switched; externally supplied)
Electrical data
AC ± 20 % / DC ± 10 %
AC 6 W / DC 4 W
18.5...30 DC SELV, ≤ 100 mA
4 A (240 V AC, 24 V DC); resistive load
Reinforced (in accordance with EN 61010)
110 ... 240 AC / 27 (24) DC
PNP
AC 6 W / DC 4 W
18.5...30 DC SELV, ≤ 100 mA
4 A (240 V AC, 24 V DC); resistive load
Reinforced (in accordance with EN 61010)
110 ... 240 AC / 27 (24) DC
PNP
Mechanical data
Yes
80 % (31 °C), decreasing linearly to 50 % (40 °C), non-condensing
Plastic: PC GF20
80 % (31 °C), decreasing linearly to 50 % (40 °C), non-condensing
Plastic: PC GF20
Ambient conditions
-20 °C
60 °C
IP20
60 °C
IP20
Additional information
254 years
Green
2 x LED
Connector plug: 4-pin with screw connection; (pack of 5)
CE
cULus
Green
2 x LED
Connector plug: 4-pin with screw connection; (pack of 5)
CE
cULus
Drawings
1: plug-in screw terminals
2: label
3: potentiometer
4: Mounting on DIN rail
01: DC Supply voltage (+)
02: DC Supply voltage (+)
03: DC Supply voltage (-)
04: DC Supply voltage (-)
05: DC Sensor supply (+)
06: sensor signal 1 pnp
07: DC Sensor supply (-)
08: sensor signal 2 pnp
13: supply transistor output (+)
14: transistor output pnp
15: common External supply (-)
16: n.c.
17: Relay (normally open)
18: Relay (common)
19: Relay (normally closed)
20: n.c.
21: AC Supply voltage (L)
22: AC Supply voltage (L)
23: AC Supply voltage (N)
24: AC Supply voltage (N)
n.c. = not connected
Downloads
Data sheet Customer reviews