AF005Sensor for point level detection G 1/2 male

  • G 1/2 M

  • Installation at front

  • Programmable

Go to customer reviews(49)
NET PRICE (plus VAT)
109.41
Offline: 115.78
GROSS PRICE (incl. VAT)
130.19
Offline: 137.77
Incl. 5.50 % online discount
Order by 2 pm CET - Shipping on the same working day
300+ in stock!

Overview

  • For optimum level measuring with water, water-based media, oils, oil-based media, coolants and powdery media
  • Deposits and foam are largely suppressed; splashes, air bubbles and wave movements can be largely suppressed by adjustment
  • 2x programmable normally open/ normally closed
  • Temperature measurement at the probe tip; for media temperature -25...100 °C
  • Parameterisation only via IO-Link
io cloud compatible

Industry 4.0 & IIoT

Discover a universe of new possibilities with smart solutions from autosen

Discover now

Description

The AF005 binary level sensor with G1/2 A process connection and IP68 / IP69K protection ratings is suitable for limit detection of water and water-based media, oils, oil-based media, coolants and powder-type media (pre-set for water-based media). A particular feature of the special sensor principle is its capacity to suppress the effects of adhesion and foam formation.

The AF005 has two programmable switching outputs (normally open / normally closed) that can be parametrized via the digital IO-Link communication interface. The process connection is achieved via a welding adapter. The device is mounted on the front and therefore predestined for point level monitoring in tanks and containers. You will find a mounting example in our know-how section.

The device is factory pre-set for water and water-based media. Foam and adhering material are largely masked out. The factory setting is quite sufficient in many cases. To deal with specific demands, the sensitivity and other functions can be adjusted / parametrized for the application in question. For instance, the effects of splashing, wave effects and air bubbles can be masked out by setting a switching delay. In addition, the process temperature can be measured at the probe tip. The temperature can only be measured via the IO-Link communication interface with acyclical data querying. During the measurement, the probe tip must be sufficiently covered by the medium. You will find information about accessories and technical data on the AF005 further down.

If you have questions regarding the IO-Link parameterization or want to use the parameterization service of autosen, please do not hesitate to contact us. Or start directly with the IO-Link starter kit ADS01.

Technical data AF005

General information

Water-based cooling lubricants, oils, water / media similar to water
See the operating instructions

Outputs / inputs

2 x normally closed / normally open programmable
Yes

Electrical data

18 ... 30 V DC
Direct voltage (DC)
PNP
NPN*
*IO-Link parameterisation
50 mA
2.5 V
35 mA
III
Yes
Yes
Yes

Mechanical data

V4A (1.4404)
FKM
PEEK
PEI
V4A (1.4404)
FKM
PEEK
M12
4-pin
Contacts gold-plated
External thread
G 1/2
9.6 mm Installation at front

Ambient conditions

-25 °C
85 °C
-1 ... 40 bar
-25 ... 100 °C °C
IP68
IP69k

Additional information

534 years
Yellow
Green
2 x LED
No accessories included
DIN EN 61000-6-2
DIN EN 61000-6-4
DIN EN 61000-6-3
DIN EN 60068-2-27
DIN EN 60068-2-6
CE
cULus

Drawings


1: Sealing

Downloads
Data sheet
Customer reviews
Product very good manufacture
11/21/2018 11:58:00 AM
Good service
7/12/2021 11:49:33 AM
47 Reviews in other languages available
Related products